Skip to content
Free US shipping over $75 · Tracked worldwide delivery
Case & Cedar
Cart (0)Account
Case & Cedar

Toro Cigar Size: Length, Ring Gauge & Case Fit

The representative Toro here is 6 × 50: 152.4 mm long and 19.84375 mm wide. A 6 × 52 has the same length but a 20.6375 mm diameter. Toro is a commercial size family, not a guarantee of one ring gauge.

152.4 mm length · 50 ringNominal diameter 19.8438 mm · diagram not actual size

Two millimeters can change the answer

A 6½-inch cigar is 165.1 mm, not 165 mm. That exceeds a listed 165 mm maximum by 0.1 mm. The finder compares unrounded values and cannot silently round that excess away. If a manufacturer instead publishes 165 mm directly, use that published value for that product.

Separate length from a thick-ring label

The 166 × 56 Laguito No. 6 factory format is longer and wider than the illustrative 6 × 50. A case selected for one is not automatically suitable for the other. The rows below show the calculation inputs so you can replace the preset with the exact listing.

Source-backed examples

FormatLength (mm)Length (in)RingDiameter (mm)Basis / sourceCompare cases
Toro152.465019.8438Guide exampleCheck this size
Canonazo1505.90555220.6375Manufacturer formatCheck this size
Magnum 501606.29925019.8438Manufacturer formatCheck this size
Laguito No. 51445.66935421.4313Manufacturer formatCheck this size
Laguito No. 61666.53545622.225Manufacturer formatCheck this size

Manufacturer examples preserve their published millimeters. Illustrative examples convert inches exactly. In either case, check the box or the manufacturer’s listing for your own cigar before choosing a preset.

Find a case for your cigar

Use the exact size from the box or manufacturer listing.

Nominal diameter: 19.8438 mm
Box-pressed or using a measured width?
5 options within listed limits · 14 needing confirmation · 0 outside listed limits
Solid Cedar 4-Cigar Travel Case
Within listed dimensions

Solid Cedar 4-Cigar Travel Case

4 Cigars · $199.00

Both supplied interior dimensions allow positive clearance. This is a specification comparison, not a physical fit test.

Listed clearance: 37.6 mm length / 2.16 mm diameter.

View this option →
14 options need a measurement — not confirmed matches

Comparisons use supplier-listed usable interior limits, not physical measurements by Case & Cedar. Missing measurements remain unknown. Exterior dimensions, product count and a photograph do not establish interior fit. A result within listed dimensions is a candidate, not a fit guarantee.

Related sizes

Print a ring gauge card · Download the size data · Read the measurement guide